Merry Christmas!

I have a Christmas present for everyone.  I decided to give you the instructions for the Fit to be Ruler Case.  Several people have asked me for the pattern so here it is:

Supplies:
1/2 yard for main body of bag
3/8 yard for lining
1/8 yard for accent
1/2 yard fusible fleese
zipper

Instructions:

From the fabric for the main body, cut:
2 - 12" x 12 1/2" pieces
1 - 3" strip
From the lining fabric, cut:
2 - 13" x 16" pieces
From the accent fabric, cut:
2 - 3" x 12" pieces
From the fusible fleese, cut:
2 - 13" x 16" pieces
1 - 3/4" strip

Piecing:

Press the 3" strip of main fabric, in half, wrong sides together.


Open up and place the fusible fleese at the fold with the fuse side downs. 

Bring up the raw edge to meet in the middle repeat for the other side, fold and press.  Fold again and press.  Sew an 1/8" from both edges to make the handle.  Cut the handle in half so that you have 2 - 20" handles.



Place the lining with wrong sides up on an ironing board.  Place the fusible fleese with fusing side to the wrong side of the lining.  Fuse in place.  Repeat for both lining pieces.  Lay the accent piece near the top approximately 1/2" away with right sides up.  Lay a handle piece 3" in from both ends of the accent piece with the raw edge of the accent piece even with the raw edge of the handle. 

 Place the 12" x 12 1/2" piece of main body, right sides together on the accent piece, sandwiching the handle.  Pin in place.  Sew 1/4" seam, catching all layers.  Press down towards the main piece.

Sew an "X" on the handle where it meets the bag.  Sew 3 quilting lines from the accent piece down to the bottom.  Repeat for both sides of the bag.



Sew around both pieces using an 1/8" seam to anchor it in place.  Trim the excess batting and backing off even.




Sew on the zipper as desired.  I used Terry Atkinson from Atkinson Designs method for sewing on zippers.  Her instructions make it very easy.









Turn the pieces right sides together and sew down the two sides.  Make sure that the zipper is open!  Then sew across the bottom.  Zig-zag the edges so that they don't fray.



Create a squared corner, sewing in 3/4" from the corner.  Repeat for both bottom corners.  Trim to a 1/4" and zig-zag the edges.



 
Put in your Fit to be Rulers and go!



I'd love to see pictures of your Fit to be Case, so please send me some pictures. 

My helper - Tillie
Hope you have a Merry Christmas, Happy Holidays and a wonderful New Year! 

Comments

Jeanne said…
Thanks for the tutorial. It's on my 'to do' list for 2012.
December 29, 2011 at 10:55 PM
LeAnne said…
Happy Holidays...Miss you abd Tillie...:)
December 30, 2011 at 8:12 PM
Post a Comment

Popular posts from this blog

Quiltmaker's 100 Blocks Blog Tour

Image
Happy Friday!  Today is my day to join in the Quiltmaker's 100 Blocks Blog Tour .  Yes, that means that I have a block included in the magazine!  The tour has been going on all week so make sure that you check out the other designers that are involved in the tour.   Here is the cover of the magazine: It's so great that they have printed 7 - 100 Block Magazines!  I am also so proud to say that I have been in all 7 issues!  My block is called Tiara...do you sense a theme these days?  I have a book coming up next week (squee!) called Diamond Traditions and I called this block Tiara...do you think I'm a princess?!  My husband sure thinks so!  Anyway, here is my block: I used the purple colorway of my fabric with Maywood Studio, Royal Gardens .  I love the way this block has a center that you can fussy-cut or use an interested print inside.  It was fun to make and there are so many possibilities to make a quilt with it....
Read more

Quiltmaker 100 Block Blog Tour

Image
Hi Everyone! Glad you could drop by for the blog tour.  It is day 2, make sure that you check out all the featured bloggers on the tour.  You can see who is blogging today and all week on Quiltmaker's Blog . My block is called Celtic Cross #775.  Here it is: When the editors of Quiltmaker's first decided  to do this, they had given out forms and information on how to submit a block.  So, I decided to go ahead and try it.  I am so glad that I did!  I have been in every volume and I can't believe that we are on Volume 8!  They have a great thing going.  I thought that I would give you some setting options for my block.  Here are a few: Set straight with no sashing For the second quilt, I added sashing and cornerstones in the quilt and they are shown above.  Now for the giveaways!  Quiltmaker will be giving an issue of Quiltmaker's 100 Blocks Volume 8 to one lucky winner.  I will also be giving a signed c...
Read more

4th of July Blog Tour

Image
Welcome everyone to the first day of the blog tour!  I'm so glad that you can join us!  Here is the schedule for the bloggers: July 4th - Open Gate - Monique, http://opengatequilts.blogspot.com/ July 5th - Stashmaster - Lisa - http://stashmaster.typepad.com/ This & That - Sherri, http://thisandthatpatterns.typepad.com/ July 6th - Sweetwater - Lisa, http://www.sweetwater.typepad.com/ July 7th - Quilter's Window - Denise, http://www.quilterswindow.com/blog/ A Quilting Life - Sherri, http://www.aquiltinglife.com/ July 8th - Cupcakes 'n Daisies - Thelma - http://www.cupcakesndaisies.blogspot.com/ The first thing that I would like to do is give you your free project.  I have decided to use my Fit to be Quarter ruler to make this adorable little quilt.  Here is a picture of the quilt: I trimmed the 1/4 square triangles using the Fit to be Quarter ruler and they came out so perfect.  The unfinished size is 2" so they are nice and tiny.  It's ...
Read more